750mm Concrete Bathroom Vanity Top - ARTI Integrated Sink
MB18-40020
Regular price $1,000.00 Save Liquid error (snippets/product-template line 158): Computation results in '-Infinity'%DESCRIPTION
The ARTI Integrated Sink is designed as a ramp style integrated sink and is available as a single integrated sink for our 750mm Concrete Bathroom Vanity Tops.
We suggest our 750mm Concrete Bathroom Vanity Top with our ARTI Integrated Sink be sitting on Joinery/Cabinetry as there is not enough room on the underside to allow for Steel Supports to fully wall-mount/float this sized Vanity Top with this Integrated Sink.
SPECIFICATIONS
- Integrated Sink Name: ARTI
- Integrated Sink Size (Internal/Top View): 600mm L x 300mm W x 5-35mm D (back)
- Vanity Top Length: 750mm
- Vanity Top Width/Depth: 400mm, 410mm, 450mm, 460mm
- Vanity Top Thickness/Face: 25mm, 50mm, 80mm, 125mm, 150mm
- Weight: 25-40KG (dependent on Vanity Top Width and Thickness)
- View our 2024 Colour Chart here
- Material: Glass Fibre Reinforced Concrete handmade in Canberra
- Finish: Matte Sealer
- Please note: the deepest point of the ARTI Integrated Sink on the underside is 125mm (for joinery/cabinetry clearance). The thinner the Vanity Top (25mm), the more of the Integrated Sink will need to sit inside your Joinery/Cabinetry. The thicker the Vanity Top means the more of the Integrated Sink will sit up and inside your Vanity Top meaning less interference with your Joinery/Cabinetry.
- Waste Hole Information: No waste plug required for this style of Integrated Sink. It is a slot drain at the back of the Integrated Sink. We cast in a 40mm Female PVC Pipe on the underside to plumbing connection.
- Waste Hole Location: This is in a set location as part of our ARTI Integrated Sink mould, however the Waste Location will vary depending on where your Integrated Sink is placed within your Vanity Top. This location will be confirmed on your Vanity Top and Integrated Sink Plan.
- Integrated Sink/s Location: In most instances, the Integrated Sink can be placed anywhere within your Vanity Top so once your Order is place, we will draw your Vanity Top and Integrated Sink Plan for your approval, once approved we can begin making your Vanity Top.
- Tap Hole Location: If you require a tap hole/s in your Vanity Top, we recommend a minimum 100mm of bench space at the back of your Integrated Sink. We will include this in your Vanity Top and Integrated Sink Plan for your approval.
*Recommended Use: Residential and Commercial
*Other: It is important to allow for approx. 20mm of concrete to surround your Integrated Sink on the underside to ensure allowances are made in your joinery.
*All dimensions are approximate.
COLLECTION, SHIPPING & DELIVERY
Please refer to our Collection, Shipping & Delivery information.
OTHER
Care & Maintenance Guide
Warranty
Terms & Conditions
Exchange, Replacement, Return, Repair, Refund
After Delivery, Installation or Collection
If you have any questions, please contact us prior to making your purchase.